Kelvin Polar Mittens

Hats and Mitts

Hands down the best mitt there is

Featuring our unique Pull Loop, Kelvin is a polar explorers dream mitten. Warm, light, breathable, easy to dry, not to mention designed and field tested by professional polar guides, this is hands down the best mitt there is.

We recommend ordering one size larger if you intend to use liner mitts underneath. Liner mitts are commonly used when in sustained temperatures of -25C/-13F and colder

Made for Icetrek by Satila of Sweden.


S, M, LG, XL

Please note that we have recently re-coded our sizes to S (8), M (10), L (12) and XL (14). Check our sizing chart.

Share this

​Shell Mitt

Made from tough 100% polyamide (nylon), the shell keeps the elements out and protects the inner mitt from wear and tear. Tough reinforced palm and thumb feature rubberised dots for grip.

The long gauntlet stops cold air from getting to vulnerable wrists and is generous enough to cover the bulkiest sleeve.

To retain the air painstakingly warmed by your hand our mitt has an elasticated wrist and cinchable drawcord on the gauntlet, and a toggled wrist loop for security.

Kelvin Mitt With Wrist Loop

Inner Mitt

Made from thick eVent®️ fleece, Kelvin's inner is water and windproof, breathable, super warm and easy to dry. We prefer a fleece inner because it doesn't lose loft, is hard-wearing, can be easily turned inside out for faster drying and it's weather capability means it can be used as a stand-alone mitt.

Icetrek Kelvin Mitt Inner

Pull Loop

We invented the mitten Pull Loop - if you see this feature on any other mitt, they copied it from us! Attached to the inner mitt, the Pull Loop makes it easy to get your mitts on when it's super cold and eliminates bunching of the inner when you slide damp sticky hands into the mitt.

The Pull Loop is long enough to get your other mitt through and doesn't require any dexterity, great for extreme-cold conditions.

Icetrek Kelvin Mitten Pull Loop

Neck Lanyard

We recommend adding an optional neck lanyard to your Kelvin mitts to round out the best extreme cold hand system on Earth.

Lanyard With Mitts

Wrist leashes

Kelvin mitts come with the traditional wrist leashes, so if prefer not to use the Neck Lanyard simply attach the leashes to the shock cord next to the Icetrek puller.

Kelvin Wrist Leash

Weight (XL): 350g / 12.3oz

Shipping weight (XL): 550g / 19.4oz

Shell: 100% Polyamide (nylon)

Palm: 79% PVC, 21% Polyester

Inner: Polyamide (nylon) 72% Polyester, 24% Acrylic

Made in: Russia

Kelvin Mitt Neck Lanyard

Parts & Accessories

Celsius Hat

Hats and Mitts

Lo Go Beanie

Hats and Mitts

GURU Face Mask

Face Mask

Measure the girth of your dominant hand over the knuckles with fingers closed.

Measure the length of your hand from the thumb base to the end of the middle finger.

We recommend ordering one size larger if you intend to use liner mitts underneath. Liner mitts are commonly used when in sustained temperatures of -25C/-13F and colder.








Small (8)

19.7 - 21

7.75 - 8.25

12 - 14

4.7 - 5.51

Medium (10)

21.5 - 23

8.5 - 9

15 - 17

5.6 - 6.69

Large (12)

23 - 24

9 - 9.5

18 - 20

6.7 - 7.87

XL (14)

24 - 25.4

9.5 - 10

21 - 23

7.9 - 9.05

© Icetrek 2024. All rights reserved.