Siglin Pulk Short
RUGGED. DURABLE. ALASKAN
The short Siglin Pulks are used by skiers, skijorers, backpackers, mountaineers, hunters, and others needing a lower volume sled that is stable and durable as well as lightweight.
- Integrated tracking
- Tough, flexible 3mm / 1/8 inch red or blue UV-resistant UHMW plastic
- Comes with traces (hauling lines)
| 
In stock. Please contact us for a shipping quote.
Share this
POLYETHYLENE CONSTRUCTION
The Siglin Pulk is made from the same material we make our Flexi base plates from. Ultra High Molecular Weight Polyethylene (UHMWPE) is a remarkable material, it’s incredibly tough and takes a lot of abrasion from rocks, perfect for the coldest temps on Earth as well as rental applications and spring conditions.
FORMED BOW AND STERN
UHMWPE can't be rotomolded or heat formed so the Siglin Pulk bow and stern are ingeniously created by bolting together stacked leaves cut into the sheet.
IN-BUILT RUNNERS
The runners on the Siglin Pulk are cleverly folded into the sheet before shaping the bow and stern.
STRONG TRACES AND RIM LINE
Siglin Pulks are fitted with 8mm 16-strand hollow-braid Polyethylene hauling traces, and braided nylon rim lines.
Name: Siglin Pulk Short (4’)
Weight: 2.3kg / 5.07lb, including all fittings
Shipping weight: 5kg / 11lb
Length: 114cm / 45"
Beam: 45cm / 18"
Height of sidewalls: 14cm / 5.5"
Height of prow: 18cm / 7"
Boxed shipping dimensions: 120 x 50 x 30cm / 44" x 20" x 12"
Sled Material: UHMWPE
Traces (tow lines): 8mm / 0.3" 16-strand hollow-braid Polyethylene
Rim lines: 4mm / 0.16" braided nylon
Made in: USA
PACKING OPTIONS
To make the sled load as narrow as possible for pulling, try loading it about six inches deep with heavy gear, then lacing the pulk tightly to pull the sides in. A second layer can then be tied on top. The sides can be pulled together at the front, or the center of the front can be pulled back to alter the angle at which the front of the sled meets the snow in deep snow conditions.
